Death By Audio

This might be our most insane pedal. Showing little-to-no respect for what instruments normally sound like, or even what people want them to sound like, we pushed this thing until it sounded fully unhinged. Want a thick, gnarly fuzz sound? Sure, you can do that, and it'll sound really, really good. You can also push the OVERLOAD slider into blooming, octave nastiness. Push it further and starve the circuit until your signal eats itself. Push it to the maximum and your sound will duck completely into the void before it returns, coming back to life with a relentless vengeance.  CONTROLS Master Volume: Controls the output volume of the effect. Overload: Sets the ceiling at which the pedal overloads. When turned all the way up, the pedal will not overload. As the control slides to the left it pulverizes the sound more rapidly. Gain: Sliding this control to the right increases gain and distortion. Horizontal sliders have been recessed to protect them from bending or any accidental movement while playing.  Harnesses a power amplifier IC to generate its insane sound. Its Gain and Overload sliders interact to create a wide range of unique sounds in various positions. You choose, to your liking, how much to absolutely destroy your sound. The further the Overload control is set to the left, the faster the effect slips into absolute destruction. Blow it out even harder and faster by slamming Gain and Overload opposite one another. Lower one or the other for smoother attack and release. Screaming octaves, thick fuzz, and the sound of your guitar reaching back from the depths of destruction are at your fingertips. Think of it as a psychotic compressor, or maybe more accurately the sound your amp would make if you set fire to it.  SPECIFICATIONS Dimensions: 4.95" x 2.61" x 2.34" (including hardware) Weight: 10 oz. Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery). Current Draw: 5 mA.

A powerful, ethereal delay pedal with otherworldly controls. Push the feedback for vast worlds of colorful sound. Introduce a bit of warble with the modulator for ghastly chorus tones, or a ton of it to absolutely warp the delayed signal. Once your delay is thoroughly warbled, turn up the fuzz and pulverize it into delayed, shattered pieces. This is the preferred echo for recording engineers and touring pros around the world because, simply put, it just sounds that good. CONTROLS Master: Sets the overall volume. Fuzz: Sets the amount of gain, from clean to fuzzed-out bliss. Delay: Sets the volume of the delayed signal. D Time: Controls the delay time (numbers shown in milliseconds) between 20 ms and 1.2 seconds. Long delay times can create flutter, noise, and distortion.  FBack: Controls the feedback of the delays, from slapback to wild runaway oscillation.  Left Toggle:  Up for clean blend,  down to kill the dry signal and hear only the repeats. Speed: Controls how fast the modulator runs.  Depth: Sets how far the modulator will swing the delay time. At high intervals, the pitch of the repeats will shift several semitones! Right Toggle:  Up for a smoother modulator waveform,  down for a sharp, square-shaped wave. . SPECIFICATIONS  Dimensions: 5.87" x 4.72" x 2.35" (including hardware). Weight: 21 oz. Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery). Current Draw: 40 mA.  

Designed for vocals, the Echo Master is a lo-fi, analog tape-style delay unit that can transform the delay sound into a chaotic realm of noise and feedback. The effects loop allows additional effects to be routed into the output, making it easy to fuse any of your favorite effects pedals with your vocal sound.  The Echo Master is not just a delay unit, however. It utilizes matched Bourns transformers on the input to create a vibrant-sounding preamp to bring you phenomenal vocal quality before you even hit the PA. Your sound engineer will hate you because you'll sound better than ever without their help. Top it off with high quality Neutrik XLR jacks and the Echo Master is the ultimate tool for taking total control of the sound of your voice. CONTROLS Time: Controls the delay time, with numbers labeled in milliseconds. In the Red Zone, the delay chip is pushed to the extreme. The signal decreases in fidelity as the time increases. F-Back: Controls the number of repeats in the delay circuit, anywhere from one to an infinite to a wall of oscillation. Mix: Controls the level of the delayed channel in comparison to the dry signal, from fully dry to an equal mix. Send/Receive: Plug out of the Send jack into any additional effects, then back into the Return jack to introduce new sounds into your vocals. SPECIFICATIONS Dimensions: 6.09" x 3.45" x 2.75" (including hardware). Weight: 16oz. (w/ Alternate Back Plate 30oz.) Power: 9V (runs on standard 2.1mm negative center 9V adapter). Current Draw: 25 mA. *Alternate Backplate: The Echo Master can also be purchased with a backplate that mounts to your mic stand. Puts the pedal within hands reach to maximize live performance tweak-ability. Recently upgraded with a die cast screw and heavy-duty welded mount. 

The Interstellar Overdriver is a true overdrive pedal, designed to blast your amp with your sound. Beautifully transparent and based around a discrete circuit, this pedal is all about the natural, wonderful sound of turning an amp up too loud. It's specifically constructed to work the same way as old tube amps - the more you turn it up, the better it sounds. The drive knob sweeps from a slight boost to a beautiful, harmonically rich overdrive. For more control, kick back the output volume with the MASTER knob while retaining the sweetness. There are a lot of pedals out there attempting to do this simple, beautiful thing, but this one is the best. CONTROLS  Master: Output volume of the effect. Overdriver: Sets the amount of gain, from a sweet boost to a nasty crunch.  . SPECIFICATIONS Dimensions: 4.75" x 4.05" x 2.17" (including hardware). Weight: 12 oz. Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery). Current Draw: 1 mA. 

The Interstellar Overdriver Deluxe consists of two amazing, fully analog, Interstellar Overdriver pedals featuring additional, revamped options! Not only can you create unearthly overdrive sounds by routing the first channel into the second, but there are 5 additional options on the second channel to give you a huge range of overdrive / fuzz tones. A pleasant boost, a squealing lead, a chopped out glitch, a jet rocket lift-off; this is the pedal to blast your sound into the cosmos!  CONTROLS  Master: Controls the volume of the circuit of the corresponding side  - left MASTER controls the left side volume and right MASTER controls the right. Drive: Sets the amount of drive for the corresponding circuit.  Rotary Selector:  1: Thin Drive 2: Normal Interstellar Overdriver 3: Bass Overdriver 4: Super Oscillating Fuzz 5: Octave Fuzz 6: Envelope Controlled Tremolo NOTE: Channel 1 is activated with the right side footswitch and adjacent controls,  always remaining the Interstellar Overdriver circuit. Channel 2 on the left, however, can be altered with the rotary to become something completely new. Both sets of controls will interact with one another to produce new, insane tones depending on which rotary position is selected - everything from piercing overdrive, to oscillations, and choppy trem. . SPECIFICATIONS  Dimensions: 5.71" x 4.89" x 2.54" (including hardware). Weight: 21 oz.  Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery). Current Draw: 2 mA.

A synthetic atmosphere creator. Use the effect on any instrument to add depth and simulate different environments. Push the Altitude and hear the reverb blasted with gloom and distorted shimmer. Flip the tone toggle to get completely different vibes. Experiment and combine a variety of settings to obtain the perfect ambiance for your sound. CONTROLS Vol: Controls the master output volume. Altitude Control:  This is similar to gain. Turn it up to bring in a more wide open, distorted sound. Verb: Blends in the amount of reverb. Dark/Light Symbol:  Dark cavernous reverberation to  bright shimmering reverberation. **When the Altitude and Verb controls are turned past 12 o'clock, the pedal can produce potentially harmful volumes, white noise, and other artifacts** . SPECIFICATIONS Dimensions: 4.86" x 3.67" x 2.06" (including hardware). Weight: 14 oz. Power: 9V (runs ons a positive ring, negative tip 9V DC adapter or included 9V battery). Current Draw: 66 mA.

ROOMS is a stereo, multi-function digital reverb capable of searing volume, gated walls of sound, and long, trailing reverberant ambiances with an intuitive array of controls designed with live mood-bending in mind. ROOMS was designed to the highest standards of flexibility and audio fidelity. A studio-quality mixer section provides independent DRY and FX controls over six meticulously programmed reverb algorithms; ROOM, DIGIT, PEAK, GATE, WAVE, and GONG. Each different verb is capable of a universe of sounds, and ROOMS is here to help you explore them. ROOMS' creative I/O switching and dual-mono dry signal lines allow for a wealth of possible mono and stereo configurations, making it easy to route signals for parallel processing or stereo amplifier setups. CONTROLS  FREQ: Controls the frequency parameter of the current mode. DEPTH: Controls the depth parameter of the current mode. TIME: Controls the reverb time in all modes. DRY: Controls the volume of the dry signal, from -inf to 20x gain. FX: Controls the volume of the reverb signal, from -inf to 20x gain. ALT: Engages the ALT mode, switching between two sets of controls. When active, FREQ is controlled with the F knob, DEPTH with the D knob, and TIME with the T knob. Additionally, the ALT mode turns on expression control of either FREQ or TIME using the F<->T Switch on the side of the pedal. NOTE: Expression control ONLY works in ALT mode and when an expression pedal is plugged in. SPECIFICATIONS Dimensions: 5.95" x 3.86" x 2.96" (including hardware). Weight: 18 oz. Power: 80 mA, 9V (runs on a standard 2.1 mm negative center 9V adapter). Expression Pedal: Almost any expression pedal will work with ROOMS. When not plugged in, the controls work as normal. NOTE: Expression control ONLY controls the F or Tknobs when ALT mode is engaged and when an expression pedal is plugged in.